4M 2015 Detailed Programme

Download the full schedule at the bottom of this page!

The slot for each paper will last 20 minutes, including 15 minutes for the presentation + 5 minutes for questions & answers.

Please prepare your presentation on a pen drive to upload it on the pc that will be available in the …

more ...


4M 2013 Invited Speaker: Professor Dr.-Ing. Christian Hopmann

Institut für Kunststoffverarbeitung (IKV) in Industrie und Handwerk an der RWTH Aachen Pontstr. 55, 52062 Aachen, Germany www.ikv-aachen.de

Biography

Christian Hopmann

Christian Hopmann, born 1968, studied Mechanical Engineering with particular focus on Plastics Processing at RWTH Aachen, Germany. Following his diploma 1996, he received his doctoral degree (Dr.-Ing.) with …

more ...

4M 2013 Invited Speaker: Yasunori Saotome

Kansai Center | Institute for Materials Research | Tohoku University | 9203 Bldg. in | Univ. of Hyogo | Shosha 2167 | Himeji, Hyogo 671-2280 | JAPAN | +81 79 260 7208 | saotome@imr.tohoku.ac.jp

Biography

Professor Yasunori Saotome

Professor Yasunori Saotome is a Professor at Institute for Materials Research (IMR) , Tohoku University in Japan and a visiting professor …

more ...


4M 2013 Invited Speaker: Professor Richard Leach

Engineering Measurement Division | National Physical Laboratory | Teddington, Middlesex TW11 0LW | UK | +44 20 8943 6303 | richard.leach@npl.co.uk

Biography

Professor Richard Leach

Professor Richard Leach is a Principal Research Scientist at the National Physical Laboratory in the UK and a visiting professor at Loughborough University and the Harbin Institute of Technology …

more ...

4M 2013 Invited Speaker: Professor Jian Cao

Department of Mechanical Engineering | Department of Civil and Environmental Engineering | Northwestern University| U.S.A

Biography

Professor Jian Cao

Jian Cao received her Ph.D. in Mechanical Engineering from M.I.T. in 1995. She is currently a Professor of Mechanical Engineering, a Professor of Civil and Environmental Engineering, and an Associate Vice …

more ...

4M 2013 Detailed Programme

The Detailed Programme* is available to download via the link below. * The programme may be changed by the organisers without prior notification.

more ...


4M 2013 Conference

San Sebastian, Spain

Venue

Barceló Costa Vasca,Avenida Pio Baroja, 15 | 20008 San Sebastián, Spain

IK4-TEKNIKER, Eibar, Spain

Dates

The main conference programme takes place from 8th - 10th October 2013

Chairs

Sabino Azcarate, IK4-TEKNIKER, Spain (Chair) and Stefan Dimov, University of Birmingham, UK (Co-Chair)

more ...

4M 2012 Detailed Programme

The Detailed Programme(*) including the schedule for presentations is available to download at bottom of this webpage.

(*) The programme may be changed by the organisers without prior notification.

more ...



4M 2011

The 8th International Conference on Multi-material micro-manufacturing will take place in Stuttgart, Germany.

more ...

4M 2011 Conference

Haus der Wirtschaft, Germany

Venue

Haus der Wirtschaft, Stuttgart, Germany (above)

Aim and Themes

The main goal of the Conference is to provide a forum for experts from industry and academia to share the results of their investigations in an open, friendly and rewarding environment and in so doing to advance the creation of …

more ...



ICOMM/4M

ICOMM/4M 2010
The 5th International Conference on MicroManufacturing focuses on the processes, equipment, and systems for fabricating miniature parts with micro-scale features.

Many fields, including medical, aerospace, military/defense, optics, automotive, consumer products, and communications, have been increasingly demanding miniature devices and components with complex micro-scale features made from a wide selection …

more ...

4M 2010 Invited Speakers

The following speakers have been confirmed for 4M2010:

  • Eric Baer, Case Western Reserve University, USA “Continuous Polymer Nanolayer Processing by Forced Assembly”

  • Phil Coates, Bradford University, UK
    "Process structuring of polymers and polymer composites in micromoulding"

  • Heinz Kück, HSG-IMAT, Germany
    "Potential of Moulded Interconnect Devices for the Packaging of Miniature …

more ...

4M 2010 Conference

PEP,Plastipolis, Oyonnax, France

Aim and Themes

The main goal of the Conference is to provide a forum for experts from industry and academia to share the results of their in-depth investigations and engage in interdisciplinary discussions about the creation of micro-manufacturing capabilities.

Papers are invited to present the latest advances in developing new …

more ...

4M 2010

IWMF20104M2010 will take place in Oyonnax, France. Papers are invited that present the latest advances in developing new processes and process chains for multi-material micro manufacture and their applications in microsystems-based products.

Full details will appear on the conference webpages.

more ...


Two Conferences Join Forces

Two conferences on manufacturing at the micro-scale are joining forces to bring together experts in the field from the USA, Asia and Europe for the first time.

4M/ICOMM 2009 takes place in Karlsruhe, Germany, from 23rd to 25th September 2009 and is the first joint conference organised by the …

more ...

SARIX - sponsors of 4M/ICOMM

HIGH POTENTIAL FOR VERSATILE HIGH PRECISION MICRO EDM MACHINING

The modern Micro EDM Machine now combines Micro EDM Drilling, Micro EDM Sinking and 3D Micro EDM Milling on one unique machine. A complete synergy of these machining ways with additional features such as Multi-axis motion CNC Controller, automatic electrode re-feeding …

more ...