Day 2 - 24 September 2009

9.15 - 10.30 Invited Talks (Aula)
Shiv G. Kapoor "CNT- Composites for the Micro-World - Design for Functionality & Manufacturabilty"
Dave Blank "Perspectives in Micro and Nanofabrication of new functional materials"
10.30 - 11.15 Coffee Break / Poster Session (Foyer)
11.15 - 12.30 Thematic Session 5 & 6
Novel Materials Processing (Aula) Process Modelling (Room 236)
Chair: Per Johander Chair: Ulf Engel

29. Simple techniques of applying lacquer based assisting electrodes for spark erosive structuring of electrically nonconductive zirconia (ZrO2)

46. Micromixing Structures for Lab-on Chip Applications: Fabrication and Simulation of 90° Zigzag Microchannels in Dry Film Resist

62. The effects of surface integrity of components processed through Micro WEDM

94. Generating Continuous Chaotic Mixing in a Twin Screw Extruder as a Means of Improving the Dispersion of Nano-Materials and Polymer Blends

28. On the environmental influence on the force between two metallic plates of a gripper immersed in a nonpolar fluid: the role of the temperature and the chemical potential.

59. Wire electrochemical discharge machining of glass using a surface roughened tool

99. Modelling machining forces for fcc metals

100. Micro-Bending of Thin Stainless Steel Sheets

12.30 - 14.00 Lunch
14.00 - 15.30 Affilliate Project Sessions
MultiLayer (Aula) CoTech (Room 236)
Chair: Paul Kirby Chair: Humbert Noll

112. MULTILAYER: a large scale production of micro devices via new rolled multi material layered 3D shaping technology

15. New approach for development of software for layer based micro-machining

23. One- and two-component powder injection moulding for micro fabrication

38. Thermography multi-material micromanufacture inspection

61. Compensation of the size effect due to the cutter radius offset in the micro milling process

111. The European large-scale integrating project COTECH “COnverging TECHnologies for micro systems manufacturing"

66. Influence of measuring parameters on the precision of atomic force microscope in industrial applications

76. Injection-compression moulding of high precision optical lenses

97. Novel process chain for fabrication of Ni shims

103. Snapshot of Micro EDM technology for industry

15.30 - 16.00 Coffee Break / Poster Session
16.00 - 17.15 Thematic Session 7 & 8
Process Characterisation (Aula) Novel Processes (Room 236)
Chair: ?? Chair: Sabino Azcarate

73. Effect of Grain Size During Electrical Assisted Microforming

75. Micro hole punching system—determination, control and effects of clearance

105. Mechanical properties test and microstructure analysis of polyoxymethylene (POM) micro injection moulded standard parts

96. Micro-injection moulding using Si/SU-8 based mould inserts

70. Production of gratings by means of step and repeat hot embossing

74. Flow control in microfluidic chips: Material choice and smart design

78. Development of a flexible gripper system for small optical assemblies

79. A new technology for contamination free dispensing

98. Surface acoustic wave (SAW) sensors, the development of a versatile sensor

77. Simulation of electrostatic self-assembly of microparts

18.00 - 20.00 Cocktail reception and tours of various facilities


4M/IWMF2016 Conference

4M/IWMF2016 Sponsors

Forthcoming Events

  • No upcoming events available

Micromachines - Supporting the 4M Association

MDPI - Supporting the 4M Association

User login

4M Conference Series

  • You must login in order to post into this group.